Hightlights
- 5-axis machining on the workpiece front and rear enables a vast range of part possibilities.
- Equipped with 12 stationary turning tools to enhance rigidity and cutting performance.
- Achieve high cutting volumes with powerful motorized milling spindles operating at 18,000 rpm.
- Exceptional damping and guidance properties of the milling spindles lead to improved workpiece quality and extended tool life.
- Experience outstanding dynamics thanks to high rapid traverse speeds and accelerations.
- Comes with the integrated iXpanel iX4.0 operating system featuring an 18.5” touchscreen based on Siemens S840D sl
The motorized milling spindle
18,000 rpm – setting the standard in its category The hydrostatic circular guide system of the two motorized milling spindles guarantees exceptional damping properties, resulting in extended tool lifespans.
Your benefit: Enhanced workpiece quality and reduced expenses throughout the entire lifespan.
Tool Storage – All Tools Onboard!
- 80/120 tool pockets (HSK-T40 mounting)
- Minimal tool change times; chip-to-chip time is only 4 seconds
- Simultaneous and independent loading of both milling spindles is feasible
- High functional reliability ensured by the standard tool magazine with a chain design
Control
Utilizing Siemens 840D sl, the most advanced control generation, you will have top-tier software integrated into your machine. In addition to a wide array of user-friendly processes for swift programming of intricate 5-axis components, the control system, as a component of iXpanel i4.0, introduces a multitude of innovations
Energy Efficiency
Recovery using regenerative drives, power shutdown, and standby mode, reducing moving masses, cooling based on the heat exchanger principle - just a few examples to significantly reduce energy consumption and conserve sustainable resources by enhancing efficiency.
Technical data
| Specification | Value |
|---|---|
| Main Spindle, Counter Spindle | |
| Bar Capacity (mm) | 65 |
| Chuck Diameter (mm) | 175 |
| Speed Max. (rpm) | 5,000 |
| Power at 100% / 40% (kW) | 20 / 24 |
| Torque at 100% / 40% (Nm) | 135 / 190 |
| C Axis Resolution (degree) | 0.001 |
| Slide Travel Z | |
| Travel (mm) | 390 |
| Rapid Traverse (m/min) | 45 |
| Feed Force (N) | 4,000 |
| Tool Carrier 1 | |
| Quill Diameter (mm) | 190 |
| Slide Travel X (mm) | 350 |
| Slide Travel Y (mm) | ± 80 |
| B-Axis Swivel Angle (degree) | 270 |
| Tool Carrier 2 | |
| Quill Diameter (mm) | 190 |
| Slide Travel Y (mm) | ± 80 |
| B-Axis Swivel Angle (degree) | 270 |
| Motor Milling Spindle | |
| Tooling System | HSK-T40 |
| Speed Max. (rpm) | 18,000 |
| Power at 25% (kW) | 11 |
| Torque at 100% / 25% (Nm) | 19 / 30 |
| Solid Tool Places | 6 x VDI25 |
| Tool Magazine | |
| Tool Length Max. (mm) | 180 |
| Tool Diameter Max. (mm) | 50 (100 with limitations) |
| Tool Weight Max. (kg) | 2 |
| Number of Stations | 80 (120) |
| Gantry-Type Removal Unit | |
| Slide Travel Z (mm) | 1,365 |
| Rapid Traverse Z (m/min) | 100 |
| Workpiece Length Max. (mm) | 200 |
| Workpiece Diameter Max. (mm) | 65 |
| Workpiece Weight Max. (kg) | 5 |
| Dimensions, Weight, Connecting Power | |
| Weight (kg) | Approximately 11,000 |
| Connecting Power (kW) | 79 |
| Controls | |
| Control System | Siemens S840D sl |
| Multi-Touch Screen | 18.5" |
Documents and brochures
INDEX Turning Grinding EN
INDEX_R200_ENDo You Need Help?
We are here to provide you with all the information and assistance you need regarding our products. Please fill out the contact form below, and we will promptly answer your questions or provide you with the support you need to make the right decisions.
News and events
Join the most important events and stay up to date with the latest industry news
Technical News in Turning and Grinding – WORKSHOP | 08.05.2025
We invite you to an event dedicated to the latest technical solutions in the field of turning and grinding! Together with our top partners – BRUCKNER, BLOHM JUNG, INDEX, STUDER, WALTER EWAG – you will explore the most advanced technologies and attend live demonstrations that will address the needs and challenges you face in your activity.
Ziua Calității ZEISS 2024 | 21 Noiembrie 2024
Vă invităm la un nou eveniment anual exclusiv în care vom prezenta pentru a treia oară soluții de asigurare a calității împreună cu partenerul nostru ZEISS. Explorați împreună cu noi lumea metrologiei industriale ZEISS..
INDUSTRY EXPO Arad | 31.10.2024
Și în acest an ne revedem la târgul Industry Expo & B2B Meeting Arad în data de 31.10.2024, începând cu ora 09:00. Suntem nerăbdători să împărtășim păreri și să găsim soluții pentru problemele cu care vă confruntați în procesul de producție.
Workshop Practic - Tehnologii inovative de prelucrare pentru reducerea costurilor de producție
Acest eveniment promite să fie o ocazie excelentă pentru a descoperi cele mai noi tehnici și metode de prelucrare care pot contribui seminificativ la cresterea productivității și la reducerea costurilor de producție.