Description
Exciting technology
Achieve expected machine results through a dynamic, transparent, efficient, and dependable process.
The MV-S series is designed for high cutting speeds, tight tolerances, and low power consumption. Its non-contact Tubular drive and modern technologies optimize wire and power consumption, ensuring economic benefits year after year. Additionally, they are ideal for reliable, unmanned operation thanks to the "Intelligent AT" wire threading.
With a general accuracy of ≥ 3 µm and a roughness down to Ra 0.3 µm, they can be used for the following production areas:
- Mold & die
- Precision engineering
- Medical (implants, tools, etc.)
- Fine blanking
- Additive industries (cut-off)
Mechanical Engineering
Perfect Drive
Durable Hardened Stainless Steel Table
Solid Machine Body
Economic efficiency
An EDM system should contribute to your company's profitability
Achieving greater precision more quickly leads to reduced piece costs
Technology
Inserting the wire break point even on thick and interrupted workpieces
Enhanced accuracy and speed are achieved thanks to the generator that anticipates, not just reacts
Increased velocity and precision result in greater savings
Control
User-friendly operation – enhancing the experience for the machine operator
Smart D-CUBES control
Productivity-enhancing network
Equipment options
Tailored expansion. The smart solution
3D probing
Angle Master Advance II
Automation
Automation needs to be adaptable, bridging various brands
Handling equipment from different manufacturers
Flexible solutions
Specifications
| Machine | MV1200S | MV2400S | MV2400S Z+ | MV4800S |
|---|---|---|---|---|
| Travel (X / Y / Z) in mm | 400 / 300 / 220 | 600 / 400 / 310 | 600 / 400 / 425 | 800 / 600 / 510 |
| Travel (U / V) in mm | 120 / 120 (+/- 60) | 150 / 150 (+/-75) | 150 / 150 (+/-75) | 200 / 200 (+/-100) |
| Taper angle (workpiece height) in °/mm | 15 / 200 30 / 87 | 15 / 260 30 / 110 | 15 / 260 30 / 110 | 15 / 355 30 / 155 |
| Max. workpiece dimensions (W x D x H) in mm | 810 x 700 x 215 | 1050 x 820 x 305 | 1050 x 820 x 420 | 1250 x 1020 x 505 |
| Max. workpiece weight in kg | 500 | 1500 | 1500 | 3000 |
| Table dimensions (W x D) in mm | 640 x 450 | 840 x 560 | 840 x 640 | 1080 x 780 |
| Table layout | Hardened three-sided table | Hardened four-sided frame table | Hardened four-sided table | |
| Possible wire diameters in mm | 0.1–0.3 | 0.15–0.3 | ||
| Wire spool capacity in kg | 10 | 10 / 16 / 20 / 25 | ||
| Automatic wire threader / wire chopper | Yes / Yes | |||
| Overall dimensions (W x D x H) in mm | 2025 x 2760 x 2015 | 2687 x 3030 x 2150 | 2837 x 3452 x 2380 | 3130 x 3475 x 2815 |
| Machine weight in kg | 2700 | 3500 | 3650 | 5700 |
| Mains voltage | 3-phase 400 V/AC ± 10%, 50/60 Hz, 13 kVA | |||
| Filter system | MV1200S | MV2400S | MV2400S Z+ | MV4800S |
|---|---|---|---|---|
| Tank capacity in l | 550 | 860 | 980 | 1480 |
| Filter particle size in µm / filter elements | 3/2 | |||
| Temperature control | Dielectric cooling unit | |||
| Weight (dry) in kg | Included in machine weight | 350 | 390 | 450 |
| Generator | MV1200S | MV2400S | MV2400S Z+ | MV4800S |
|---|---|---|---|---|
| Power supply unit | Regenerative transistor pulse type | |||
| Cooling method | Fully sealed /indirect air cooling | |||
| Max. output current in A | 50 | |||
| Dimensions (W x D x H) in mm | 600 x 650 x 1765 | |||
| Weight in kg | 240 | |||
| Control | MV1200S | MV2400S | MV2400S Z+ | MV4800S |
|---|---|---|---|---|
| Input method | Keyboard, USB flash drive, Ethernet, 19” touchscreen | |||
| Control system | CNC, closed circuit | |||
| Min. command step (X / Y / Z / U / V) in µm | 0.1 | |||
| Min. axis resolution in µm | 0.05 | |||
| Equipment | MV1200S | MV2400S | MV2400S Z+ | MV4800S |
|---|---|---|---|---|
| Tubular Shaft Drives with linear scales (X / Y) | Yes | |||
| Control M800 with 19” full-touch monitor | Yes | |||
| Hand pilot with configurable LCD monitor | Yes | |||
| Vertical front door | Manual | Automatic | ||
| Digital AE II generator | Yes | |||
| Ethernet/DNC/FTP | Yes | |||
| Preparation for automation | Optional | |||
| McAfee AntiVirus embedded | Optional | |||
| Production data output | Optional | |||
| 2D CamMagic on-board | Yes | |||
| Corehold technology | Optional | |||
| Job scheduler | Optional | |||
| Sleep mode | Yes | |||
| Optional Hardware | MV1200S | MV2400S | MV2400S Z+ | MV4800S |
|---|---|---|---|---|
| High-Spec package | Optional (not retrofittable) | |||
| Wire station for 16 / 20 / 25 kg wire spools | Optional | Yes | ||
| Wire station for 50 kg wire spools | Optional | |||
| Angle Master Advance II – basic kit including aligning device | Optional | |||
| Angle Master Advance II – wire threading set | Optional | |||
| Automatic Renishaw probe on sleeve | Optional | |||
| ERGO-LUX LED floodlights | Optional | |||
| Tricolour status lamp | Optional | |||
| Automatic dielectric water refilling | Optional | |||
| Connection to external cooling system | Optional | |||
| External signal output with relay circuit board | Optional | |||
| Automatic filter switching system | n/a | Optional | n/a | Optional |
| Optional Tools | MV1200S | MV2400S | MV2400S Z+ | MV4800S |
|---|---|---|---|---|
| Connect Kit | Optional | |||
| 3D CamMagic on-board | Optional | |||
| mcAnywhere Service | Optional | |||
| mcAnywhere Control/ mcAnywhere Control lite | Optional | |||
| mcAnywhere Contact/ mcAnywhere Contact lite | Optional | |||
| Tool package / automation solutions | Optional | |||
Documents
Brosura
MV1200S-layout-en
MV2400S-column-layout-en
MV2400S-layout
MV4800S-layout
MV1200s transport
MV2400s column transport
MV2400S transport
MV4800S transportDo You Need Help?
We are here to provide you with all the information and assistance you need regarding our products. Please fill out the contact form below, and we will promptly answer your questions or provide you with the support you need to make the right decisions.
News and events
Join the most important events and stay up to date with the latest industry news
Technical News in Turning and Grinding – WORKSHOP | 08.05.2025
We invite you to an event dedicated to the latest technical solutions in the field of turning and grinding! Together with our top partners – BRUCKNER, BLOHM JUNG, INDEX, STUDER, WALTER EWAG – you will explore the most advanced technologies and attend live demonstrations that will address the needs and challenges you face in your activity.
Ziua Calității ZEISS 2024 | 21 Noiembrie 2024
Vă invităm la un nou eveniment anual exclusiv în care vom prezenta pentru a treia oară soluții de asigurare a calității împreună cu partenerul nostru ZEISS. Explorați împreună cu noi lumea metrologiei industriale ZEISS..
INDUSTRY EXPO Arad | 31.10.2024
Și în acest an ne revedem la târgul Industry Expo & B2B Meeting Arad în data de 31.10.2024, începând cu ora 09:00. Suntem nerăbdători să împărtășim păreri și să găsim soluții pentru problemele cu care vă confruntați în procesul de producție.
Workshop Practic - Tehnologii inovative de prelucrare pentru reducerea costurilor de producție
Acest eveniment promite să fie o ocazie excelentă pentru a descoperi cele mai noi tehnici și metode de prelucrare care pot contribui seminificativ la cresterea productivității și la reducerea costurilor de producție.