The driving coating
CARBIDOR® is tungsten carbide based coating especially developed to drive workpieces. The coating can be applied to all hard tool steels and particularly features wear resistance, high coefficient of friction and low coating thickness. CARBIDOR® is applied to enhance friction between workpiece and clamping tool. In this case almost all shapes can be coated. To drive by a workpiece centre, the centre must be ≥ 4x2 mm. The axial pressure should be as high as possible.CARBIDOR® coated tool steel dead centres are used for gear cutting, fine turning, finishing, measuring/inspection.
CARBIDOR® features: Permanent connection with the carrier material, impact resistant. Hardness 74–78 HRC, coating thickness approx. 25 μm. In case of wear recoating is possible. Surface roughness Rz: CARBIDOR®-F Rz 15 -17μm, CARBIDOR®-M Rz 19-22μm, CARBIDOR®-G Rz 29-33μm
CARBIDOR® coating is applicable to BRUCKNER standard tool steel dead centres and tool steel dead centres in special design. All soft and hardened components of tool steel and stainless steel, jaws, spheres, collets etc. can be coated.
Află mai multe informații
Vârfuri de centrare cu strat de CARBIDOR®-MDo You Need Help?
We are here to provide you with all the information and assistance you need regarding our products. Please fill out the contact form below, and we will promptly answer your questions or provide you with the support you need to make the right decisions.
News and events
Join the most important events and stay up to date with the latest industry news
Event
Technical News in Turning and Grinding – WORKSHOP | 08.05.2025
We invite you to an event dedicated to the latest technical solutions in the field of turning and grinding! Together with our top partners – BRUCKNER, BLOHM JUNG, INDEX, STUDER, WALTER EWAG – you will explore the most advanced technologies and attend live demonstrations that will address the needs and challenges you face in your activity.
Event
Ziua Calității ZEISS 2024 | 21 Noiembrie 2024
Vă invităm la un nou eveniment anual exclusiv în care vom prezenta pentru a treia oară soluții de asigurare a calității împreună cu partenerul nostru ZEISS. Explorați împreună cu noi lumea metrologiei industriale ZEISS..
Event
INDUSTRY EXPO Arad | 31.10.2024
Și în acest an ne revedem la târgul Industry Expo & B2B Meeting Arad în data de 31.10.2024, începând cu ora 09:00. Suntem nerăbdători să împărtășim păreri și să găsim soluții pentru problemele cu care vă confruntați în procesul de producție.
Event
Workshop Practic - Tehnologii inovative de prelucrare pentru reducerea costurilor de producție
Acest eveniment promite să fie o ocazie excelentă pentru a descoperi cele mai noi tehnici și metode de prelucrare care pot contribui seminificativ la cresterea productivității și la reducerea costurilor de producție.